Hi Folks, I'm looking for any help from the community. I've connected my
2 private homes with 2 old (support expired) fortigate/fortiwifi and I'm
facing a very strange behavior... Situation Site A : FortiGate 60D
(6.0.12) - Freebox Revolution (FTTH),...
Hi folks, I'm looking for a great config to forward all HTTP/HTTPS
traffic from the LAN clients to a public squid server through a
fortigate (FortiWifi 60D). Here is a tiny view of the network :
+----------------------+ (Internet)------| Squid (IPPRO...
Here is the dump of the packet sniffer for the same test:FGT-SITEB #
diagnose sniffer packet
VPNIPSEC-SITEAinterfaces=[VPNIPSEC-SITEA]filters=[none]pcap_lookupnet:
VPNIPSEC-SITEA: no IPv4 address assigned0.265162 192.168.153.8.6690 ->
192.168.3.113.5...
Below the first results of diags. Test Environment: - PC (MS Windows 10)
on site B connecting to Synology web interface on site A - PC
identification: MAC=a2:fb:e9:a9:4d / IP=192.168.3.104 - Synology
identification: MAC=00:11:32:85:4a:2b / IP=192.168...
Thanks, it's ok for the wccp on interface and policy.But now, I need to
understand one more thing:1. where do you tell the fgt to forward
traffic through GRE to IPPROXY?
1: WCCP proxy config on the fgt & enable WCCP on the intercept
interfaceEnabling WCCP on Internal interface is ok, but it's not so
clear to me for WCCP proxy config. What do you mean? 2: set the squid
box for WCCPThat's OK! 3: determine if you forwar...
Hi,Indeed, I'd like to have a transparent proxy and don't want to change
config an all devices...I can change the squid config as needed. If port
3129 is not the best, I can change.Examples I've found on the cookbooks
are showing the config for a squ...
