Hello, In a situation with sd-wan with a static route for a zone and via
iBGP I receive the same prefix for another zone, even changing the
administrative distance of the static route to the same as iBGP, the
static prevails. Anything other than admi...
Hello, In a Fortinet SD-WAN setup with an active-active dual-hub
architecture with iBGP in the overlay, are there any best practices or
guidelines concerning inter-hub communication? This comunication is made
in the same overlay that Spoke Hub commun...
Hello, In Fortinac I´m trying to add an Fortinet Fabric. I already added
the Fortigate, but to add the fortiswitches do I need to have an valid
Fortilink subnet (exemple 192.168.10.X)? I need to configure SNMP in the
fortiswitch too? Thanks in advanc...
Hi, I´m tryng to make a web filter override to storage.live.com url. I
create a custom category, I associated the url, and in the web filter
profile I allow the custom category. But unfortunately when the client
go to storage.live.com and he is is bl...
Putting the question in another way. Two HUBs (one main, one backup)
that redistribute the default route (centralized Internet for some
VLANs) and static default for the ISP underlay (local breakout for other
VLANs) how can I notice if for example HU...
Yes, if I change it to a smaller distance, it works. I would like to
have static iBGP prefixes with the same distance, then in the SD-WAN
rules I validate which VLAN makes a local breakout (static route) and
which ones don't (iBGP route). Thanks
My database Routing table for VRF=0S *> 0.0.0.0/0 [200/0] via x.x.x.x,
wan2, [1/0] *> [200/0] via x.x.x.x, wan1, [1/0]B 0.0.0.0/0 [200/0] via
x.x.x.x (recursive via HUB1VPN1 tunnel x.x.x.x), 00:02:19 (recursive via
HUB1VPN2 tunnel x.x.x.x), 00:02:19,...
