I have problems with simple SIP-Clients sitting in my local network to
get inbound calls: (ISP on WAN1) -- (FG60B Route/NAT enabled outbound)
-- (INT1 192.168.23.x) clients are Softphones connencting to external
proxy (sipgate.at). Outbound call work...
according to this post
http://support.fortinet.com/forum/tm.asp?m=79153&p=2&tmode=1&smode=1
your default route should be se to 2.2.2.144 . in my case this adress is
stated as the gateway of the customer net, but of course not pingable,
should it be, ...
This worked like a charm, just set up one IP-Pool per external IP from
the routed net and select external IP´s easly. I was told by the ISP
the reason for this setup is to change the DHCP-given IP any time
without the need to change the rest of he c...
Sorry for the missing info: It´s a Fortigate-60B 3.00-b0741(MR7 Patch
5). I´ve read a lot about this SIP-ALG, but could not find anything in
the config-gui. Maybe that is missing. I just activated VoIP-Logging in
the used policy, but that did not c...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
