Hi, Please help me using my fortigate 100D as aggregate switch just as
we do in Cisco layer 2 switch as below : interface GigabitEthernet1/0/33
switchport trunk native vlan 400 switchport trunk allowed vlan 2,3,400
switchport mode trunk switchport no...
Hi, Need urgent attention with an issue related to trunking aggregated
ports in criss-cross HA environment. I am sharing below configs from
cisco c2960 switch1 and cisco c2960 switch 2 with on the firewall
fortigate 400E with ports 9,10,11,12 in 802....
Dear All,I am using FGT400E and I am facing issue with an application
named "Tally" which is used for accounting purpose. This application
server is installed on a server with IP : 192.168.1.2/24 Port 9999 and
working fine in the same network [VLAN 1...
Hi,Pfa an elaborated network diagram. Firewall FGT100D at Site 2 act as
a router only. FGT600c at Site 1 Headoffice side has been used for
firewall permissions with different policies created for Site_2. Now the
issue is with the routing that when we...
Hi, I want to forward multicast with ip 188.8.131.52 from my multicast
server to ipsec vpn client pc connected through forticlient. I can able
to connect vpn and can telnet the server very well but not receiving the
multicast. I did all settings very we...
Hi, try to connect vpn through tunnel mode and try to usemstsc.exe
-multimon reference :
See if it helps. ThanksRohit
Hi, It can be stopped from application control. You can make 2 policies
which will be clone but with 2 different schedule(Night and day) and
allow or deny updates as desired but through application control. This
is what we do ThanksRohit k
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.