Troubleshooting Tip: FortiOS to AWS VPN Anti-Spoof...

Jackie_T · 12-02-2025

Description This article explains how to check the supported platform or hypervisor for Fortinet private cloud (virtualization) solutions. Scope Fortinet-VM products. Solution Follow the steps below to check for the supported platform for each Fortin...

Jackie_T · 12-02-2025

Description This article describes the settings for a customized user role to enable live monitoring feature. Scope FortiPAM v1.6.x, v1.7.x Solution To enable live monitoring for a customized user role, follow the steps below: Go to the created user ...

Jackie_T · 12-01-2025

Description This article explains the issue where some secret videos cannot be played when it is uploaded with browser extension mode. Scope FortiPAM browser extension v7.4.4/1847 and below. Solution When Secret is launched with browser extension mod...

Jackie_T · 11-05-2025

Description This article describes the behavior of FortiAuthenticator when creating certificates with underscores and hyphens. It explains why FortiAuthenticator allows underscores in certificate names despite RFC 1035 prohibiting them, and how to cr...

Jackie_T · 11-02-2025

Description This article describes how to resolve the FortiPAM GNOME RDP issue. The issue occurs when attempting to access a GNOME RDP server through FortiPAM, resulting in a failed connection. Scope FortiPAM. Solution GNOME RDP is supported by Forti...

Jackie_T · 09-30-2024

Hi, For simple setup, you can achieve this by configure ECMP routes.Mean both WAN1 and WAN2 will have same distance value set, but WAN1 will have higher priority value set.The link with higher priority value will be less preferred and stay as standby...

Jackie_T · 09-11-2024

Hello HS08, I believe you are looking for the default value for ospf cost bandwidth reference in FortiOS? There is a setting under "config router ospf" >> "set auto-cost-ref-bandwidth". The default value set is 1000, in megabits per second. Reference...

Jackie_T · 08-26-2024

Hi Shane, Yes, is top-down rule.If you have multiple vlans, I believe you already configure trunk to allow those vlans on the switch? You might want to check below:1. Ensure routing is configure correctly:#get router info routing-table allYou should ...

Jackie_T · 08-26-2024

Hi forsenGa, There is a KB as well for this:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Authentication-fails-with-clock-skew-errors-in/ta-p/222360 Thanks.

Jackie_T · 08-26-2024

Hi Alan, Transparent mode (Layer 2 deployment) is for a deployment where you need to integrate the FortiGate into an existing network without changing the IP structure, while still allowing for security policies.Transparent mode does not perform NAT ...

User Statistics

User Activity

Technical Tip: Fortinet Product Private Cloud supported platform

Technical Tip: Customized user role for live monitoring

Troubleshooting Tip: Some secret videos cannot be played on FortiPAM when using the browser extension mode

Technical Tip: Understanding Certificate Creation with Underscores and Hyphens in FortiAuthenticator

Troubleshooting Tip: FortiPAM GNOME RDP Issue

Re: Need assistance - dual WAN

Re: OSPF Cost

Re: Fortigate 201F 7.6.0 LAN -> WAN ALL/ALL not working

Re: SAML clock skew issue

Re: Transparent mode

Troubleshooting Tip: FortiOS to AWS VPN Anti-Spoof...

Technical Tip: FortiGate Disable Hardware Accelera...

Troubleshooting Tip: NPU Info Flag Field in FortiO...

Technical Tip: FortiGate monitoring script

Technical Tip: Compatibilities of Hardware Switch ...

Re: How to increase (expand?) disk space

KCS

User Statistics

User Activity

You are leaving our website