It would be a good idea to know how strenght the client signal is to
know which TX power to use in every AP. Using AP Handoffset handoff-rssi
25 -> Signal noise + 25db (Example: -95dbm for noise + 25db = -70dbm)set
handoff-sta-thresh 8 -> How many cl...
Hi FortiSpecialysts. After few days analysing, and because this device
has no license anymore, I have decided to open, clean internal parts and
do some tests, and finally found the root case: My suspects fell over
this part "unable to handle kernel p...
Hi vmahendra. You just need 2 IPs that can communicate to each other. If
each IP can reach the other one, you are able to form neighborship. Use
point-to-point and may be you need to use ignore-mtu option in ospf
interface, because in VPN IPSec you c...
After your last message, I have tested recreating VLAN ID under SSID
interface, and tested NAC policy with SSID in bridge mode again, and it
worked fine for me (7.2.11). Before, with only VLAN ID on trunk
interface only (under hardware switch), it wa...
I Have a little bit simillar issue. I am using a Fortigate 100F with
FortiOS 7.2.7 and FortiAP 231F with version 7.4.2 Radio issues appear to
be resolved, but random STAs have been disconnected from WTP. Logs only
show that STA is leaving wtp Actionc...
