Good evenning specialysts. I am in a trouble with Fortigate Cluster
using LACP.How differences in working (network visibility) between
Fortigate Cluster A-P and A-A? How Firewall negotiates LACP in each
scenario? Can I configure Cluster A-A connectin...
Hi Ut_Ut. Have you validated that? From Fortiswitch, Nac policy is
working, but from SSID perspective, you needed to recreate the same Vlan
IDs to NAC policy work? Or are you just asking about how to have it
working? I Have tried to test NAc policy f...
This message is been presented to me at initializationReading boot image
2957608 bytes.Initializing firewall...BUG: unable to handle kernel
paging request at ffffff008069651dIP: []
strcmp+0x4/0x30PGD 0Oops: 0000 [#1] SMPCPU 0 Modules linked in: Pid: ...
I have a similar sinthom.After power on, may be during boot, or after
finish starting system, sudenly reboots with kernel panic.Tried 7.2.11
and 6.2.5 as backup firmware. Try again formating boot device and
uploading firmware again from TFTP. Thanks ...
Hi Saven. Yes, at the moment you apply the configuration, A-A or A-P the
network will experience a connection lost. Fortigate in Cluster works
with a virtual Mac address, and when you you apply HA configuration, it
changes interface mac address, so y...
