Hi All, I have a quick question, has anybody else experienced issues
when setting up a Guest wifi network, using a Fortigate and FortiAP's
with a captive portal for authentication, and until you turn off
Randomized MAC on the Android/iOS device, the ...
Hi Everyone, Having a slight issue with a guest WiFi with Guest token
implementation I am currently busy with, firstly some background: Site
has a Fortigate 80F firewall and a few FAP-221E APs installed on site,
Fortigate and AP's updated to the late...
Hi,I just want to get some advice, I currently have a FortiWifi 50E
firewall in place with a fiber connection going into WAN1, however I
will be installing a fail over fiber connection into WAN2, now what I
want to find out is, I would like to use WA...
HI all, I'm having an issue with port forwarding using a dynamic public
IP, I have gone through the Fortinet cookbook and setup everything as
follows: But I think I am missing something somewhere as I cannot get it
to forward port 37777 and access th...
Hi, I don't know i this is possible, but I am trying to setup a schedule
that blocks only facebook and social media traffic at certain times for
specific users, but allows all other services during those times. for
example: users have access to allow...
Correct yes, the client gets the correct IP from the correct subnet, and
am able to see the device connected on the Wifi Clients list and able to
see which fortiAP the device is connected to, the current Fortigate
version is 7.2.1 Above is how the SS...
Hi, Yes the devices get an IP from the firewall, as for the
authentications, there is no MAC filtering and the only authentication
for internet access is via tokens with a pre generated username and
password.
neonbit wrote:I've configured the SD-WAN with the exact way you've said
Nark0t and it works perfectly. Set the SLA as 100% packet loss only, and
have WAN1 as the primary link and WAN2 as the secondary. Okay awesome,
at least Im on the right track :),...
Thanks guys, yes I can access the firewall externally via the ddns as I
have setup the gateway device to forward all external traffic to the IP
address it has assigned to my firewall. I will take the steps provided
to me and work through them today, ...
Hi I do have 2 policies, however realized I should provide better over
view of my policies: I have groups for Full access, limited access and
no access with users assigned to each group and allowed services are
always open on those groups. Now I want...
