Hi, I' ve configured an IPSEC Tunnel between fortigate and another
firewall called PFSense. The tunnel is UP and everything is fine.
Servers behind the Fortigate firewall can ping the remote host that are
behind PFsense and vice versa. One problem th...
Hi All, I have a fortigate Fortigate-200A 3.00-b0737(MR7 Patch 3)
configured with two VLANS on the internal1 interface as follows. Vlan10
- 192.168.10.0/24 Vlan20 - 192.168.20.0/24 The servers behind those
vlans are working properly, can browse the i...
I want to enable that for testing only. Btw, I did a firmware upgrade
and the new firmware image allow you to add more trusted host. The new
firmware works like a charm and has more settings especially on the VPN
tab.
Hi, In the admin access it only allows you to enter 3 trusts. And
unfortunately the 172.16.0.0 subnet is not int the list. How can I add
more IP' s for the same admin. Thanks.
Hi, That' s it, I' ve configured the admin access to allow
192.168.0.0/16 and I can ping the gateway from the switch now. I don' t
know why this behavior and like you said It doesn' t seems logical but
other than that the Fortigate Firewall seems to ...
