I have a Fortinet 60C running the most recent firmware available for it.
I have setup OSPF to a Cisco 2821 router in my lab. OSPF comes up and I
exchange routes, however I am unable to communicate from my LAN to the
learned routes. The fortinet will ...
Oddly enough I reconfigured this and connected the Cisco the the DMZ on
a different network. After that and adding firewall rules I was able to
ping from the router secondary subnets to my LAN subnet but not the
other way around. I had to add a polic...
Pyy, I just tried option 1 and I still cannot ping the 192.168.48.1 IP
on the 2nd ethernet interface on my Cisco router, although the Fortinet
has leared it via OSPF.
Ken, Attached is a topology picture (poorly drawn, yes). The Cisco sits
behind the internal interface on the Fortinet, yes. I'm trying to keep
all this traffic local on my lan, it's for a LAB. Yes the PC and
Internal IP and one interface of the cisco...
Toshi, Thanks for the suggestion. I just tried it and the rule is
catching traffic however I'm not getting anwhere with the block now: ---
192.168.48.1 ping statistics --- 15 packets transmitted, 0 packets
received, 100.0% packet loss Brandons-iMac:~...