I' ve opened a ticket with Fortinet support. I' ll post any info I
receive from them. I tried running IE as the administrator, but I still
get the message " Error:Permission Denied" . Is there a configuration
change in the FG SSL-VPN, or with the pol...
If it' s still needed... here' s what I did to get the SSL VPN working
with MR6 Build 668 (p2). My VPN' s were working fine with MR5 Patch 5,
but memory management was awful... that' s why I upgraded. I didn' t
have to change the SSL VPN config or th...
GeeWHIZ... First... don' t rely on the doc in the Knowledge Center...
it' s misleading and not entirely accurate... I' ve spoken with my SE
and he' s looking at it. vondrack' s set up is the same as mine, except,
i only use this for failover so my st...
it' s fixed. the tunnel is from a fgt-60 to a fgt-50. the 60 is running
2.8 and the 50 is running 3.0. to fix the problem, i need to add
source/destination addresses to the Quick Mode Selector. VPN --> IPSEC
--> Auto Key --> Phase 2 --> Advanced --> ...
i' m receiving the same info in my log. i' m trying to connect 2 fgt' s.
one is running 3.0 build 219, the other is running 2.8 build 488.
everything looks fine, but the tunnel will not come up. any help would
be appreciated. bradley
