Hi,We have Fortigate with proxy-based inspection mode (FW:5.4.10)When
web-filter module blocks a website, client have information in his
browser.But when application control module blocks a website it is just
blank (white) and after a while - this si...
Hi,On my FortiGate 100D I have Hardware Switch with just one physical
interface attached to it and many virtual interfaces (VLANs) on that
switch.I would like to change it to Aggregate port because I want to
connect it to the switch stack where I can...
Hi,I have set IPsec VPN. I use peer ID from dialup group for
authentication. The group name is VPN_Group1When in FortiClient profile
I assign VPN_Group1 to it, user in this group have this profile assigned
correctly when connected.But when I create a...
Hi,on one of my remote laptops (windows 10 pro x64) after dialup IPSec
connection incorrect route is created: In this situation (bottom
picture) when forticlient is connected, there is no internet access or
servers (behind FortiGate) access.The IPSec...
Hi,should static entries have a higher priority than FortiGuard category
based filter for both Block and Allow action?I ask because I blocked
Bandwidth Consuming category and then added a static URL rule
*youtube.com with Allow action, but the youtub...
Kiran wrote: Did you configure your IPSec VPN with Phase 1 - Local ID?
When I tried native CISCO IPSec VPN, it did not work for VPN which is
configured without Phase 1 - Local ID. Modify your VPN configuration
with Phase 1 - Local ID and give it as '...
jconegundes wrote:Does anyone know when we will have a new FortiClient
version? 100% compatible with Mac OS Big Sur? Just read this thread (2
posts above):Kiran wrote:Yeah, But unfortunately when I reached out to
support, they said that currently the...
The built-in Cisco IPsec VPN of Big Sur works fine for me. It adds
routes correctly so it works even if you have split tunnel enabled. DNS
resolution work fine too. Now I won't be using the Fortinet client
anymore - there have always been problems wi...
Same with me. The connection is established, I get the IP address but no
traffic goes through. I have tried different versions of the client.
Even old versions worked on Catalina. BTW:On Mac OSX: have you tried to
back up FortiClient settings and the...
