Hi All, I have a fortigate 30d. I am trying to set it up for transparent
mode but as soon as I change to transparent, set the IP/Subnet and
Gateway it applies the settings and then I cannot reach the web address
to finish the setup of the unit. Is an...
Hi All, working with the fortigate 30D and the web filtering isn't
working. if you look below, this is my response to checking if the web
filtering is running# diagnose debug ratingLocale : englishThe service
is not enabled. but everything on the gui...
Hey Ede, ya you're totally right. It does have a Mini-USB MGMT port.
this is pretty "basic" as it requires the special fortiexplorer software
and you have access to the GUI interface from the program. the biggest
issue is that when you set it in tran...
Hello All, there were 2 areas that I missed in my configuration. Since
the lan-wan firewall rules were already in place I did not investigate
the policies of each firewall rule and missed the "on" button for the
web filtering. the next thing is to co...
Hello All, I was able to get it figured out. The guide here:
http://www.fortinet.com/videos/inserting_fortigate_unit_without_changing_network_configuration_transparent_mode.html
is missing something (at least as it pertains to my situation). In order...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites