I recently replaced our FortiGate 60E devices with brand new 60F units
(clean config build). Since going live, the HQ 60F has been highly
unstable. We've experienced multiple unexpected reboots, almost on a
daily basis. The 60E's were rock solid for ...
Hello, We have a customer who will be sending us a VPN router to
facilitate a connection to their intranet and they have stated that I'll
need to allow IPSec traffic on port 4500. I tried to create a policy for
this but quickly remembered I have no i...
Hi all, I struggle through every step with these routers, very sorry for
the noob questions but please be gentle, I don't really know what I'm
doing here. So we were quickly exhausting our single class C network and
I decided to run another line from...
Hi all, I made my first attempt at creating an IPSec tunnel between our
main building (60c) and our new remote site (60e). On the remote side, I
can access the 60c at our main HQ with no issues, make config chances,
etc. From the HQ, I can access the...
Hi all, This should be an easy one for you experts! We just purchased a
second location for extra warehouse space, and I need to bridge the two
buildings. We have a 60C at our main site, and I purchased a new 60E for
the second site. The IPSec tunnel...
Thank you all for the great advice and help! I didn't know I could call
in directly, but I was able to finally connect with a tech. Apparently
they are working on this issue as my case is not unique. Here is what
they did for me to temporarily fix wh...
Thanks, Gus. More internal addresses is the goal, but changing the mask
seemed like the more complicated route. I don't fully understand the
ramifications of that change so I thought better to leave it alone.
Edit: I should also mention I have anothe...