Might be a simple one for you. Any hint is appreciated.I have a FGT-60F
cluster that has an active LDAP server pointing to an AD server that is
located on a local "internal1" interface. This connection works fine. If
I do "Test Connectivity", I can s...
Using the menu "VPN Location Map" does show me a nice overview of the
currently connected VPN connections (IPSEC, SSL VPN). However, the
locations of the fortigate are most of the time somewhere in the Gulf of
Guniea (0°S, 0°E). The physical location...
Came across FG-IR-21-190.As we only deploy FortiClientVPN and the PSIRT
seems to point towards FortiESNAC (which ForticlientVPN does not
support), are FortiClientVPN installations affected as well? If yes,
what is thge recommended version to go to? 7...
I do have a network 192.168.193.0/24 that provides the IP address via
linux/dnsmasq. (VLAN1, not tagged). This is the main network. I do have
another network 10.10.10.0/24 that provides IP address via interface
DHCP server of a Fortigate. (VLAN 10 ta...
I have a fortigate with a dedicated mgmt interface.On the lan side, I
use i.e. port1 with the address 192.168.77.1/24.Is it possible to "set
dedicated-to management" to the mgmt interface and give it an address
like 192.168.77.200/24 ?Usually, with n...
The remote FG does not see any packets. Well, the local VPN interface
does not see any packets either. That's why I suspected a routing issue
(nope, it's not= or a policy missing.For the policy I would need a
source address, but i do not know which o...