Hi, I'm trying to configure Forticlient with multiple remote gateways
for redundancy but when I add a second remote gateway the custom port
option dissapear... This is the example with one remote gateway and a
custom port 4443, no problem here, it wo...
Hi, i'm using this commanddiag sniffer packet any "host x.x.x.x" 6 0 ato
capture some traffic, then convert the text file using the tool
fgt2eth.exe to convert it to
pcap.https://kb.fortinet.com/kb/documentLink.do?externalID=FD30877
Then... when I'm ...
Is possible to do it in VPNSSL? Client certificate plus LDAP username
and password for authentication. And a bit more complex, Cliente
certificate match UPN with LDAP username. Cliente certificate is only
valid for the user that is trying to authenti...
Hi all, i'm trying to configure a L2L vpn as backup. 1 - Now I have
tunnel L2L working between Fortigate-ASA, and apply secondary route as
backup of the principal (higher value that is lower priority). My
problem is when principal access goes down th...
toshiesumi wrote:If you use "any" for interface, the same packet likely
show up multiple times in the log like at the ingress interface and the
egress interface, which Wireshark would see as duplicates or
retransmission. If you wan to see the output ...
Hi, yes... you can check this post for 2FA using
PIhttps://www.error509.com/2020/05/fortigate-2fa-con-freeradius-y-privacyidea/
About UPN and check thin in user certificate is not possible with
Fortigate, unless you manually enter all the users into ...
Hi, I have the same problem. Citrix open application store but when I
try to launch one of them nothing happend (black screem).Did you solve
the problem? how?
Hi , enmoc I have PrivacyIDEA +TOTP working without issues for tunnel
mode but now I'd like to achieve client cert + active directory auth
(LDAP) 2 factor only for Web mode. In summary I have two scenarios: 1-
One realm /corp using PrivacyIDEA with L...
