Hey all, I'm struggling with something super simple. I'm working through
the "Hub and spoke SD-WAN deployment example" in the admin guide, trying
to set one up in real life. Some of the configuration elements,
specifically the local and remote IPs on...
I'm losing my mind... could really use some help (please)! I'm Running a
Fortiwifi 61e (with the onboard WIFI disabled)Connected to it is a
FortiAP-41e, via a F108 POERunning 6.2 Firmware Everything's been
working great. No major firmware updates or ...
Kind of a weird request, i know, but here's some background info to help
explain: I have a network with no internal DNS, where most devices get
DHCP leases (from the Fortigate), and a large portion of the network is
BYOD. I have a logging tool that I...
Not sure where to ask this, figure this is as good a place to ask: On a
whim yesterday (actually, the decision was based on a conversation with
my kid, whom was following directions a youtube video that had him
change his server location on a game he...
I'm looking at my device inventory under "User & Device". There's a col
on that page for "User". Is that column only populated when I enable
user authentication? Is there any way to associate devices to a specific
user, without authentication? (IE: t...
Thank you for your input! I've only depicted 3 spokes, but in actuality
there are closer to 30. More than half the spokes have dual WANs and the
hub will too, eventually. When i tried moving the spoke's tunnel2
interface to the hub's tunnel1 network,...
I appreciate your continued input!I think I'm getting this...So it's
sounding like the config should look something like this, yes? Hub local
IP interface1 = 192.168.1.1/32Hub remote IP interface1 =
192.168.1.2/24Hub local IP interface2 = 192.168.2.1...
Thank you for the input!! Based on your input, it's sounding like the
config should be changed as follows? //No ChangeHub local IP =
192.168.1.1/32Hub remote IP = 192.168.1.2/24 //Changed remote IP from a
/24 to a /32Spoke 1 local IP = 192.168.1.3/32...
@gfleming / @akileshc, Thank you both for the input!I read through
akileshc's article, but the principle is not clicking There's more to
it, but I need to get past this simple hurdle. This is a setup that i've
taken over. I wasn't understanding why i...
It looks like 10 more minutes of searching would have returned an answer
- i just found this other forum topic:
https://forum.fortinet.com/tm.aspx?m=176782&mpage=2 It looks like the
management network(s) of the APs needs to be in trusted hosts... Tha...
