Hello everyone!I have some problem with my Fortinet 80 C, it doesn't
boot after firmware update. When I restarting it only "status" led diode
blinking on green and after few second all internal ports blinking one
second and status led changing color ...
Dave Hall wrote:Aside from changing power adapters, you pretty much did
everything that the RMA department would ask of you. Open an RMA ticket
for the device. Thanks for help, Dave!
I checked another fortigate 80c and it is ok. CLI connection works fine.
So, in this situation I can only assume RMA ticket? As it continues to
look like? This will be my first ticket.
Led diode "status" only blinking on green, no any red color. I checked
another device (switch D-Link) on that cable and PC and its ok.
Connection settings are fine, I sure. Strange situation, ehh... I have
second fortigate 80c, but I will be able to ...
How about..pressing a key? Reboot the 80C? Pressing the keys do not give
anything (CTRL+C, F, G, ESC, etc.), reboot the device as well. It does
not show any info as before format. It looks as if there was no
connection ... I've tried a few times. Eh....
Thanks Dave for your feedback.Earlier was my mistake, another device
blocked fortigate CLI connection - I solved it. So, at the beginning I
chosen format option "F" and next, when I was trying install firmware by
tftp (I introduced tftp and fortigate...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
