Have anyone encountered their fortigate displaying 100% CPU on their
system resources? Using a FGT 200B and upgrade recently with 5.2.0. was
working fine until today then got this issue. Thought its IPS issue so
restart the IPS engine but no help wen...
Have anyone tried to configured a site to site vpn from a Fortinet 200B
running FortiOS 5 to a H3C ER3200? Has configured but not able to bring
line up. Could it be the H3C ER3200 should be configured as a CISCO
firewall? I know cisco site to site vp...
I have a wildcard cert from godaddy which I generate for my exchange
2010. I have tried to import the cert into fortinet but unable to do so.
Can anyone share how to do it correct? The reason is to secure my
website for remote access.
I have configured a site2site vpn for my fortigate devices main office:
fgt200B on 4.0MR1 patch 5 (internal lan:.104.x/22) remote office: fgt80C
on 4.0MR1 patch 2 (internal lan: .1.x/24) I configured them in
route-based. FGT200B configuration 1) fgt2...
Hi, I am trying to setup a cisco vpn client version 5 to communciate
with my fortinet 200B. But i get this error " negotiation failure ike
Negotiate SA Error: ike ike [1074] ike 0:ciscovpn:15: no SA proposal
chosen no SA proposal chosen" my phase 1 s...
Thanks to jmac, I managed to export the cert and using the KB article,
extract out the pem & cert file and import it into the firewall. Then I
set fortigate to use the imported cert. Tested n its working very well.
thanks all for the inputs.
Hi, I remove the policy route from both fgts. still unable to ping to
either site. tunnel is still up. there are 2 firewall policy at each
fgt, one is internal->vpn interface, the other is vpn
interface->internal. both polices at both fgts are set al...
For POP3 I cannot get any emails. And no I do not stored the password
inside TB. I have to key in every time i on TB. As for the host 104.206,
if I log in via PPTP, there is no issues. I forgot to mention that i am
running split tunneling.
