Hi, Last couple weeks we are experiencing more and more problems with
people who logs on to the domain.. If a user logs in they will show up
in the FSSO agent on the domain controller. But we have about 30-40
users (of the 1500) that are not showing ...
Hi, I have a cluster of 2 Fortigate 600C in A-P mode. MR3 P10 Running in
NAT mode.. Last week i redesigned my internel network. Now we have the
following design Port1 DMZ Port2 Internet Port 4 WAN (Leased line to
MPLS) Port 15-18 Aggregate running VL...
Hi, We are planning a firewall replacement. We are looking for a 600C in
cluster (2x600C). We want to use all options (AV, IPS, URLF, DLP, IPSEC,
SSL, Application Control etc) What would be the real throughput? We are
planning to use the Firewall as ...
We have about 200 SSL-VPN users that connects via the Portal or SSL
Client. The authentication is via LDAP. this works fine. But when the
users are in, they have access to many VLans in the organisation where
the applications are installed. For examp...
We have 2 Fortigate 400a in a cluster. Since 3 weeks we do not get any
logs in our FG Analyzer. If i reboot 1 FW device in the cluster we get
about 10 seconds of logging then it shuts down again.. I have
checked/compared all settings with another FW ...
Gateway is set correct.. I do have 1 policy... Any to Any and ALL
allowed.. Back and forward.. So it is wide open.. It is our monitoring
system that cannot ping certain hosts.. no firewall installed locally..
His own ip adres is 172.16.100.34 FW adre...
I have the same problems with SSL VPN as you (Phuoc Ngo). Also get the
error " No Matching Policy" But i' m still on MR2 P6 (400a) and P2
(500a). both firewalls has the same issue.. Support can' t find the
problem either.. Do you have an idea what th...
We have 2 firewall clusters running on Version 4 MR2 P8. According
support this was the latest most stable version, but we have some issues
with VPN portals that users cannot login.. I see some fixes in the
release notes but i' m not sure if we shoul...
I have read the topic. If i understand it correctly: i have to create
for each usergroup a seperate SSL Portal and policy' s to allow the
traffic they need. It is a shit load of work and it will create a lot of
rubbish in the FW. also the overview wi...