About yashaswinits_FTNT

yashaswinits_FTNT · 11-06-2017

DescriptionThis article covers permission issues with nplus1 remote login which cause the slave to use "remote" user name instead of "admin" while trying to ssh into.ScopeFWC-100D v8.3.3.SolutionThis issue has been reported after upgrading controller...

yashaswinits_FTNT · 09-14-2017

Description This article looks at the separation of authentication certificates on the FortiGate for various applications such as SSL VPN and captive portal authentication. Solution Only a single certificate can be mapped to all the applications like...

yashaswinits_FTNT · 02-13-2017

DescriptionThis article explains why SSID may disappear when ARRP was enabled on the controller.ScopeMeru controller, 8.1 and later.SolutionARRP is one of the new features which has introduced in Firmware 8.1 and later, where in APs scan the best ava...

yashaswinits_FTNT · 11-17-2016

DescriptionThis article addresses the requirement to forward all wireless traffic from the WLAN controller to a third party web filter.Scope6.1 and later.SolutionThere is no specific option on the controller to forward all the wireless traffic to any...

yashaswinits_FTNT · 10-03-2016

DescriptionThis article provides antenna gain values for the AP822 rev1 and AP 822 rev2 access points. SolutionModel Number Antenna Gain (dBi) 2.4GHz 5.0GHzAP822e 4 6AP822eV2 3 3AP822i 3 4AP822iV2 4 6

User Statistics

User Activity

Technical Note: When adding master to slave inventory, slave uses remote@ instead of admin@

Technical Tip: Separation of authentication certificates on the FortiGate for different applications

Technical Note: SSID disappears when ARRP is enabled on the controller

Meru Technical Note - How to forward all Wireless traffic from the WLAN controller to any third party Web Filter

Meru Technical Note: Antenna gain data sheet for AP822 Rev1 and Rev2

Fortinet Training Institute

KCS