Hello to All Out of sudden today, I was unable to connect thru
Forticlient or thru web to my office. I just got this message after
giving my credentials: Your PC does not meet the host checking
requirements set by the firewall. Please try again in a ...
Hello... I have a FortiGate 600E device... In the current design there
is one internal interface that connects all internal vlans to the
firewall:(10 users vlans, 1 guests WIFI vlan, 1 Servers Farm vlan)...
This connection comes directly from a Cisco...
Hello...I used to have one WAN line that handles all the traffic to
outside... Recently I added another 2 lines which I combined as an
SD-wan interface, and when trying to configure static route I got the
message:"you cannot have duplicate routes on ...
HelloI have two fortigate devices 500E and 600E ... I know in this case
that I can't benefit from HA..So right now I'm just using 600E in my
production network.Is there any way that I can get the most of these
devices together ? Thanks
Hello...currently I'm using port2 as my LAN interface.. But to get the
benefit of the higher speed I want to use X1 port as my LAN interface.Is
there a way to move/migrate the configuration to the new port without
having to start from scratch? Thanks
Thank you for your replyYeah things didn't seem to be related... For the
time being I had rebooted the unit and that solved the problem...I have
opened a ticket with support in order to get further investigation
Thank you for your replyThe provided link solution states
that:FortiGates in both entities must be the same model and must be
running the same firmware.which also not applicable in my case
