I'm hoping someone will be able to offer me some advice please, I have
an issue configuring VLAN trunking, which when I enable the config I
think should work, the CPU runs up to 100% on my Fortigate 60E and the
device becomes unresponsive. Very Basic...
Team, Very happy to report that all is working as required now. @Ede -
thank you for your guidance. Thanks also to the others who left
comments, they all helped me troubleshoot and get to a working solution.
I repeated the procedure I outlined above ...
Hey Ede, Thank you so much for the welcome, and the detailed
recommendation. I had actually tried this approach, but when I rebooted
the FGT it came back up again without any VLANs at all. Here's what I
did:1. Created an LACP port on the Switch (LAG3...
Hey Bob, yes absolutely. I am careful with backing up configs across all
my devices, and keeping a thorough log of changes and current config
summary. I was easily able to test the config I mentioned above, and
then revert to the prior (working confi...
Quick update for anyone interested in this topic - I enabled STP on the
Zyxel and the Fortigate, and found I was able to bring additional trunk
ports online without both devices crashing. However, no traffic was
actually traversing the additional por...
Thanks guys, yes I see that it is very likely that I have created a
loop. @emnoc - apologies for the ambiguous language around balancing out
traffic, I was referring to achieving a load balancing effect by using
multiple trunk ports on the Zyxel to r...
