Re: 2 Tunnel SSID bounded to the same network

JayD_FTNT · 11-11-2020

It can be done by creating different wtp-profile for each AP and apply deny-mac-list under wtp-profile. Instead of allowing only specific MAC addresses, this will deny these specific MAC addresses forcing them to connect to other bssid. FortiWiFi# co...

JayD_FTNT · 08-21-2020

Hi Safwa, I'm not from support. Can only provide the suggestions for your problem. Please open a ticket with Fortinet tech support. They should be able to provide the answers. Regards,Jay

JayD_FTNT · 08-20-2020

Hi Safwa, Thanks for the info. Could you please run one test. Connect your wireless clients to AP root and see what is the throughput achieved. Speedtest app on phones checks the speed based on the internet connection. Suggest to run throughput test ...

JayD_FTNT · 08-19-2020

Hi Safwa, Can you please share some more information regarding your set-up. 1. On which radio are you forming the mesh up-link?2. How are you running your throughput tests? (tools, clients, topology, traffic type is udp or tcp etc) You can find more ...

JayD_FTNT · 08-18-2020

Hi Safwa, There is a reset button. As mentioned before, it is behind the Philip screw which can seen on the right side of your photo attached. Because its an outdoor AP, its reset button is covered. Remove that screw and you should be able to reset b...

User Statistics

User Activity

Re: Bind MAC to specific FortiAP

Re: Problem throughput for AP22E I

Re: Problem throughput for AP22E I

Re: Problem throughput for AP22E I

Re: problem 224E fortiAP

Re: 2 Tunnel SSID bounded to the same network

Re: FAP-C24JE managed by FortiGate

Fortinet Training Institute

KCS