I'm trying to get a FortiGate setup and I have an outside subnet and an
inside subnet setup on it. From AWS, I have multiple subnets setup and
wish for each of those to start going through the FortiGate. Can I set
these up as VLANs on the FortiGate o...
I did yes. I have a route table sending traffic from say the VLAN 250 to
the Fortigate. I have the routes, 172.250.0.0/16 ( the main route ) and
then 0.0.0.0/0 going to the inside interface on the FGT. That route
table has two subnet associations wit...
I don't guess that makes sense for what I'm trying to accomplish. I
currently have 11 subnets on this VPC. I would really have to create the
firewall instance with 11 ports? What if I decide to add 50
subnets...how to I get those routed to the Fortig...
Yes, the VPC has multiple subnets, which I'm putting as VLAN interfaces
on the FGT. I guess my question is...on the FGT, do I need a separate
port to attach to each interface for the instance? I have the medium
instance running right now, and it only...
Yes, correct about those.In the VPC, I have subnets 172.250.253.0/24 and
172.250.250.0/24 Inside IP of FGT: 172.250.253.254. Any instance machine
I put into the 172.250.253.0 subnet, it works fine. I can ping both
ways. IP of VLAN 250 on FGT: 172.250...
# diagnose sys ha checksum showShould return something like:global: 0a
23 ce 1d f2 76 85 7a f0 8b 43 36 43 84 05 19 root: 73 cb 94 8d 19 80 e1
1c 8a b0 a1 28 32 0a ed 3a From the above, find out which is not sycned.
You can do this on both units inde...
