Hi guys, Am I correct in saying that application control (or all
security profiles for that matter) are not involved in the policy
matching process in FortiOS. Once a policy is matched via source,
destination, port or time, the security profiles of t...
Hi all, I have observed that when using the creating 2 custom services
using the same port number, the firewall will recognise that port number
globally with only one of the custom services, therefore if anything
else arrives on at a policy on that p...
Hi all, Looking at web filtering at the moment and when I click on the '
To have the rating of this web page re-evaluated please click here.'
button it re-directs me to a Fortinet web page. Have any of you got
configuration examples of how to have th...
Hi all, I am using a firewall running OS5. I am struggling to find where
I can view application control logs for applications that have been
blocked/passed - does anyone know where these can be viewed? In UTM
monitor/logs there is everything but appl...
I have seen the issue with the appended :0 already and have raised a
ticket with Fortinet on this - I will let you know the response. I am
running 5.0.8 at the moment. So when you had both WebBrowsing AND HTTP,
did the firewall pass both, regardless ...
Did you follow the release notes correctly? If you update to version 5
GA first this change should be covered. I have upgraded many boxes from
4 to 5 and not experienced this problem.
you could try: diag test application 99 That will
reset applications - not sure which the SSL one is, on my 100D I have
sslacceptor and sslworker. Hope this helps!
For anyone who stumbles across this post, the resolution is as follows:
Need to enable logging in the cli under the app control: config
application list edit " XXXXX" set extended-utm-log enable set log
enable
