wanting to setup two firewalls with same access on two different isp's
etc. How can i setup in the forticlient firewall1 then if its down go to
firewall2 without using dns? any idea's?Thanks,
Can anyone elaborate on what type of SD-WAN support the new OS has to
offer? I have used Silverpeak and Riverbed for sdwan in the past. I
could see that if security with Multipath routing functionality
intelligence enhancements in the fortigate platf...
I have recently setup several fortigate 90D's and a few 200D's with
OSPF. The are all connected via a VPLS solution.the OSPF interface is
wan1. The internal network is a port 3 or internal (a named interface)
they also have a separate interface on th...
Its been my experience so far with most vendors that the latest code
train is the feature rich code train but not the stable train.Can anyone
from Fortinet validate that the 5.2.x train is really the beta for whats
to come in the future for the stabl...
Yes is did restart the firewall. I did find that you can just add all
the interfaces to the passive-interface command and that will work just
fine. I believe the bug is that its advertising multicast packets out
interfaces that are not configured for...
I believe the device behind the firewall sends the icmp unreachable. I
want to filter out these but see no way of doing so at this point?emnoc
wrote:I was not under the impression the fortigate sent icmp unreachable
directly. Can you explain what's s...
I have several sites using hosted IP phones and the only problems Ive
ever had are with the sip helper. I always disable and remove it. If you
can ping the ip address of the sip server (pbx) and have fairly low
jitter then they should be working. The...
I know that its not used for site to site vpns but dont understand why
its happening. I' ve deleted and recreated the vpn 4 times with the same
problem. However if i create a policy based vpn i have no problems! Go
figure!
