Hello, We have a pretty important FG-500E that is serving several
thousand users and recently it has started randomly dropping sessions.
It seems to be most noticeable when users are downloading files as the
download suddenly halts and because the se...
Hello! I have enabled LLDP between a FortiGate 600D and one of my Cisco
switches. Using show lldp neighbor on the Cisco switch displays some
pretty useful information: Device ID Local Intf Hold-time Capability
Port ID FGT61E4Q16001015 Gi6/0/43 117 R ...
Hi all, This may be a really simple fix so I apologise if I sound like a
dunce. I have set up a site to site VPN between two customers, I have
control of one of the firewalls and would like to do a ping test from
the side I can control to the other s...
Hi There, I am trying to work out whether I should use a FortiGate to
pair with two upstream Cisco routers over BGP and I seem to have hit a
snag. Currently, where I plan to put the FortiGate in the topology,
there is a 3600 series Cisco router which...
The error is climbing at a fairly steady pace. It was error2=003beaf2
when I created my post and now its incremented to error2=003bf2eb so
although its not going up at an alarming rate, it is definitely a
concern. I failed to answer your other questi...
Hi Tioeudes, I have seen that error before, but not on this firewall. We
are only seeing session clash errors in the logs and not NAT port
exhaustion errors.
Hi Emnoc, Thanks for the quick reply. We have Solarwinds NPM and it
constantly monitors the session counters on all of our firewalls every
15 seconds or so. Looking at the historical data for the firewall with
the problem the sessions seem to peak ar...
Hi Emnoc, Thanks for the reply - I can't get those CLI commands to work.
I can get as far as diag switch-controller dump but lldp isn't an
option. Instead I get: fw-test (root) # diag switch-controller dump?
vlan_config configured switch-controller v...
