Hello We are having a really strange issue with our Fortigate 600c. The
unit will go to "sleep", usually during the night sometime but the past
week it has happened a few times a day, and the campus will loose
internet access. As soon as somebody tri...
We are using captive portal on a dedicated physical port on our Fortinet
600c unit. We want to change the subnet that uses the captive portal
because we need more addresses. I have set the gateway and the routes on
our core switch. I have changed the...
Hey all We need to edit the disclaimer page to make students agree to
our terms for legal reasons. We can't enable it on the interface even
though you can customize it there, and it isn't in the replacement
messages list, and when I enabled it on the...
The issue I have is that you can only enable the disclaimer on the
firewall policy and not the captive portal and you can only enable the
captive portal on the interface and not the disclaimer. This means that
the captive portal comes up before the d...
I have searched the width and breadth of the internet on how to enable
the disclaimer page for captive portal. We have captive portal working
on a interface but there is no way to set the disclaimer options. Plenty
of information on 5.0 but nothing a...
Logging appears to be normal, when the unit is at fault and when it is
working we get the usual logs. I just noticed going through the Forward
traffic logs that when the unit is at fault clients keep making DNS
requests over and over again and assuma...
The only thing that is in the logs is "DHCP Statistics", that shows up a
few times from about 2 AM to about 7 AM each morning, I assume that has
nothing to do with it. I have factory reset and re-applied the backed up
config file, and it is still doi...
Yes it worked, when I terminal into the unit it also starts working. So
basically it seems to go to sleep until there is any access attempt what
so ever. There is never anything in the logs though, it just turns into
a brick or something.
I have not tried that, next time it goes down today I will give it a
whirl. I am really hoping it is not a hardware fault. We are currently
on Firmware v5.2.9, build736.
