Hi: I created an ipsec-VPN to connect iphones to the voip PBX but I am
not getting the ips assigned. This is my phase1 configuration. name :
VPNPBX type : dynamic interface : port1 ip-version : 4 local-gw :
0.0.0.0 dpd : enable nattraversal : enable ...
Hi: How do I create reverse DNS records in a Fortigate 300A FortiOS 4.0
to be used as an internal DNS Server. I need it to configure open
directory. Thanks for the help
Hi: The engineer that I had and was familiar with the fortigate 300 we
have is not working with us anymore and I have not been able to contact
him. I am not able to access the fortigate in any way, web, console
cable etc. I don' t know if something h...
Hi: I have a Macintosh powerbook and an Inspiron with windows 7, None of
my computers have serial ports and I need to connect to the console of a
Fortigate 300B. Is there an easier way than getting a usb to serial
adapter and then a serial to RJ45 ad...
I have a Fortigate-300A 3.00-b0670(MR6 Patch 3) with 2 Wans, a T1 and
DSL configured for auto failover. I have set up a couple VIP and can be
accessed fine from outside the network, but if I try to access the
domain I set up from inside the network i...
Finally got it working but I don' t understand why. I turned off pfs in
phase2 and connected just once and then started getting errors, then I
enabled pfs and is working fine. I configured phase 1 and 2 via the gui
and just used the cli to setup mode...
I think everything is configured fine but in the log I get: check for IP
assignement method ... No IP assignmet method defined In my phase1
configuration I specify assign-ip-from range Any ideas