Hi all,I've two fortigate VM with WAN configured like show
below:FORTIGATE1- > interface WAN1 -> x.x.x.132 (ISP subnet
/28)FORTIGATE2- > interface WAN1 -> x.x.x.133 (same above ISP subnet
/28)VM shares the same public subnet, VM are connected to the ...
Hi all,I have a FortigateVM with 3 WAN configured in balance mode, same
ISP with different Public IP Range for each.All works great with one
Unit, if I configure HA (A-P mode) traffic outside do not work.If I
roolback to one unit everything return wo...
Hi all,on Fortigate 90D I've configured a WAN1 interface with Public
Range an everythings works well.Now I've requested a new connectivity
(with another ISP) with a new public Range and I've already configured
it on WAN2 interface without static rout...
Hi all,we have a Fortigate-VM with only one Interface dedicated for WAN
and a public IPs range (/28) configured with IP PoolsNow we have a new
different public IPs range (/28) belong to different public subnet
(maybe same router?) and we want to conf...
Hi, like you suggest in your previously answer, could you write Garceful
Start\Stop Load Balance CLI command for this kind of configuration? (my
config shown below): edit "NLB-TEST_HTTPS" set uuid
01vvv30c-311d-51e5-f8ad-53270fa88375 set comment "Tes...
