Hi, I have a existing IPsec tunnel between head office (FG60E) and
remote office (FG60D) for file sharing. At the moment existing tunnel is
working fine from both side. Both device has v5.6.2 build1486 Now I got
a requirement to route all the interne...
Hi,I have 2 Fortinet device 60E and 60D. I have been trying to create a
VPN tunnel between the device. I followed this cookbook article
https://cookbook.fortinet.com/site-site-ipsec-vpn-two-fortigates-56/ and
both my devices are behind the NAT So, I ...
Hi, I have 2 Fortinet device 60E and 60D. I have been trying to create a
VPN tunnel between the device. I followed this cookbook article
https://cookbook.fortinet.com/site-site-ipsec-vpn-two-fortigates-56/ and
both my devices are behind the NAT So, I...
Hi, I am using Forticlient 6.0.1.0099 in my windows 10 (1709)
system.Using forticlient as an antivirus software But frequently
forticlient block internet on startup it happen 2 to 3 times each week.
so every time I have to shutdown the application an...
Hi,I am using Forticlient 6.0.1.0099 in my windows 10 (1709) system.
Using forticlient as an antivirus software But frequently forticlient
block internet on startup it happen 2 to 3 times each week. so every
time I have to shutdown the application an...
Hi Jirka, Thank you for your response, I have not updated the Phase 2
address. Once I updated to 0.0.0.0/0.0.0.0 now all the route is passing
through IPsec VPN and internet is working. Thank you again.
Hi emnoc,If I enable NAT-T VPN disconnect, VPN is up with only NAT-T at
disabled state.I have run the given command please checkSite A
-------------------------------------------------------------------------------------
edit "Test_VPN" --More-- set ...
Hi thanks for the commands, Please check this make sense to you.
----------------------------------------diag debug enable FGT60D # ike
shrank heap by 131072 bytes ike 0:Test_VPN: link is idle 6
192.168.4.4->183.82.35.75:0 dpd=2 seqno=df ike 0:Test_V...
Hi Jackie, Thanks for your reply, 1. Traffic not passing from which site
to which site? Traffic not passing from both site 2. Is there subnet
conflict on both end? (mean both site have same local network) No, both
site has unique subnet. (both site r...
Sorry, I created the post in wrong form. I have created new Post in VPN
form. Use this link https://forum.fortinet.co...m=172678&tree=true PS:
No option to delete this post.
