On the local side FortiGate 200E is installed that has an IPSec tunnel
to Azure FortiGate-appliance:- Any host on the local side can ping the
AzureFortiGate and Azure VM- But FortiGate 200E (local) itself cannot
ping AzureFortiGate's internal or publ...
Hi,I have a FortiGate 200E connected to Core Switch (HP Aruba 5406R).
WAN1 is configured as the primary connection on the FortiGate for all
VLANs traffic. Now I want to configure a PPPoE backup connection on WAN2
as a failover only to 2 specific VLAN...
If you want your internet connection not to go through Bell modem, ask
their support to setup the modem in Bridge mode then your FortiGate will
have the public IP under PPPoE instead of a private.You can add the VLAN
under the interface through GUI o...
If you can't ping WAN IP make sure ping is allowed on the WAN interfaces
which is disabled by default.Check system events under Logging and
Monitoring and you should find some logs about the issue.
Hi Tjnihal, Try this and it should work. SMTP Server: Your MX Endpoint,
example: contoso-com.mail.protection.outlook.com Port: 25 Default Reply
To:
Authentication: Off Security Mode: STARTTLS [ul]Office 365 Connector:
This is needed to accept email ...
Hi @nsabaratnamWe have experienced v6.0.2 for a while it worked
perfectly, but couple weeks ago I upgraded to v6.0.4 build0231 and the
only issue client facing now is intermittent dhcp ip release for one
subnet that I have to reset the dhcpd daemon t...