Description This article describes how to view the 'Current Usage' and
'Default Maximum' global resources in the FortiGate GUI, such as
firewall policies, firewall addresses, firewall address groups, etc.
Scope All FortiOS. Solution Note: This GUI fe...
Description This article describes how to cross-reference Common
Vulnerabilities and Exposures (CVE's) on the FortiGuard website to check
for affected Fortinet products/firmware versions and the corresponding
mitigation. Scope All Fortinet products. ...
Description This article describes that when a dynamic address object is
added/updated via an SDN connector, error '-173' appears in the 'diag
debug cli 7' output. Scope All FortiOS. Solution In the below 'diag
debug cli 7' command output, a dynamic ...
Description This article describes how to list all DHCP configurations
currently in use on the FortiGate with CLI commands. Scope All supported
versions of FortiOS. Solution Aside from using the GUI to view interface
DHCP scopes and related info, it ...
Description This article describes a CLI change in v7.2.8 and above
where 'set auth-url' under 'config user saml' has been removed and has
been replaced with 'config user external-identity-provider' in v7.2.8
and above. Scope FortiOS 7.2.8 and above....