Folks, We are deploying our first 140E into our environment. We have a
data center with a 500D and a Comcast 1gb Internet circuit. We have
about 100 sites that have anywhere from 25-50mb fiber circuits. ALL
sites with the exception of a new site with...
Folks, Recently my company decided to save money by transitioning away
from MPLS and metro ethernet based connectivity to Internet based site
to site VPN's. For our stores we are installing Time Warner and Comcast
business class Internet. Generally e...
Well. It just gets more interesting. I have been experimenting with two
versions of windows as my source. It seems copying from a 2008R2 machine
gives me much better performance. But. If I reboot the 140E my test
machine (windows 10)copies at a bette...
Thank you for your reply. I tried several things with support yesterday.
Here are some observations. If we disable A/V on the relevant policy
throughput is fine. Also in some cases if we wait it out. 3 minutes
after a file copy starts it will pick up...
Did quite a bit of experimenting with mtu and tcp_mss to no avail. The
thing that pointed me to hiding traffic in a GRE was I noticed my wan1
link would bounce under load. That was connected to the Comcast router.
Once I put a router between the fgt ...
I thought I would drop a note on this thread as a final update. My
company decided to discontinue the use of COAX based circuits and went
all fiber. However, occasionally we will open a new site and need to use
coax due to its faster install time. Wh...
