Re: link between public domain and local server

jintrah_FTNT · 07-15-2022

Description This article describes the FortiGate behavior on its various functions when FortiGuard licenses are expired Scope FortiGate Solution Firewall: Firewall services will be fully functional. High Availability (HA): HA will be fully functional...

jintrah_FTNT · 11-17-2021

Description For some reason, it may be required to clear the route cache on FortiGate. This article describes how to flush FortiGate's route cache. Scope All FortiGate. Solution To clear the route cache, from cli issue the below command: diag ip rtca...

jintrah_FTNT · 11-17-2021

Description This article describes how to disable daylight saving time (DST).This feature is enabled by default but in some cases, the end user may require to disable it for some reasons. Scope FortiOS 7.2.0 or lower. Solution To disable the DST from...

jintrah_FTNT · 10-18-2021

Description Terminating a dialup user who is already connected to VPN from VPN access without affecting other users Solution 1) Disable/delete the required dialup user account, or remove the user account from VPN access group defined in phase1 settin...

jintrah_FTNT · 09-22-2021

DescriptionWhen session helpers are involved to allow traffic for an expect session, and traffic logs generated for these sessions references a policy id does not really indicate a correct policy match.Solution Once an expect session is created, it a...

jintrah_FTNT · 04-15-2024

Hi, For ddos protection, use ddos policies. Please see https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/771644/dos-policy on setting up different anomalies and thresholds. Best regards, Jin

jintrah_FTNT · 04-15-2024

Hi, Is it for the purpose of IPSec/SSL VPN alone?   best regards, Jin

jintrah_FTNT · 04-15-2024

Hi, One can define a traffic shaper per-ip and and assign it within the policy e.g config firewall shaper per-ip-shaper edit "limit200" set max-concurrent-session 200 next end best regards, Jin

jintrah_FTNT · 04-01-2024

It doesnt matter whether the interface is copper/fiber for spanning, interface members of soft-switch interface could be spanned. best regards, Jin

jintrah_FTNT · 03-31-2024

Hi Rotta, Please see the article https://community.fortinet.com/t5/FortiGate/Technical-Tip-SPAN-Port-Mirroring-using-ports-associated-to/ta-p/198276 on configuring span ports by setting up interfaces in soft-switch. Best regards, Jin

User Statistics

User Activity

Technical Note: FortiGate behavior when FortiGuard licenses are expired

Technical Tip - How to clear FortiGates route cache

Technical Tip: How to disable daylight saving time (DST) feature

Technical Tip: Removing a dialup VPN user immediately from VPN access

Technical Tip : Logs showing traffic from different source address not allowed in firewall policy

Re: Enquiry on FortiGate TCP Connection (conn-limit) limit and TCP/UDP/ICMP limit feature.

Re: Need FortiClient VPN software to install 7.0.8 or 7.0.12

Re: Enquiry on FortiGate TCP Connection (conn-limit) limit and TCP/UDP/ICMP limit feature.

Re: Config span (Mirror port) on port fiber

Re: Config span (Mirror port) on port fiber

Re: link between public domain and local server

Re: What is FortiOS's differences between v7.0.x a...

Re: link between public domain and local server

Re: How to disable NGFW and UTM feature on Fortiga...

Re: Inter-VLAN routing issues - FortiGate

Re: Enquiry on FortiGate TCP Connection (conn-limi...

Re: Detect IPFS.Gateway by IP reputation

Re: installing firmware from system reboot

Re: Web Filter - Wrong categorization

Re: Fortigate80E 2 Wan Problem

Fortinet Training Institute

KCS