Hi, Have a query around ADVPN inter region traffic flow. Lets consider
we have two regions and each region has their own Hub to advertise the
regional LAN summary routes to its regional spokes. And both the hubs
have eBGP neighborship between them to...
Hi, We have 1 hub and 2 branches in our setup. All these 3 location has
one internet link and one MPLS link (Hybrid underlays) We are having BGP
on loopback overlay setup We have requirement of ADVPN between Spoke 1
to Spoke2, with the help of SDWAN ...
Hi, Would like to understand whether any possible additional
configurations available for below scenario to work In our SDWAN setup
we have 1 Hub and two spokes. Spoke1 and Spoke2 has two inet links. Hub
also has two internet links. Dialup tunnels bu...
Hi, I have query on how licensing works when we configured Fortianalyzer
in analyzer and collector mode. If we have one layer of collector which
collects logs and does Archive storage and another layer of
Fortianalyzer in analyzer mode which receives...
Hi, Whether a GRE interface can be added to SDWAN member interface??
Currently we have a scenario, where forward traffic will be sent our
through one physical interface (Internet) and return traffic will be
through GRE built on top of same physical i...
Hi, This PBR is for overlay stickiness and initially few packets from
spoke1 will use MPLS to form ADVPN with spoke 2 on MPLS link but later
once internet ADVPN child tunnel gets flushed (since one side internet
is down), traffic on spoke 1 will be s...
Hi, Building separate BGP neighbors between spoke might not be scalable
for large volume of sites. I think this is a very corner case scenario
and there is no other workaround in 7.2 version. But from 7.4 version
with ADVPN 2.0 this problem can be so...
