After downgrading my FortiAnalyzer 200F to version 6.2.5, build 1307,
the default report templates, and charts are missing and no longer
visible. There is nowhere I am aware of to download these reports and
charts for importation. Can anyone provide ...
All,Successfully upgrading a FortiGate 200F results in a broken
FortiDDNS application. The FortiDDNS server list no longer populates
with a list of available domains which breaks the service. Rebooting the
firewall does not solve the problem. Further...
I have configured access to a FortiAnalyzer 200F via a FortiGate SSL-VPN
portal. I can connect to the login GUI, enter a username and password,
but when I click the "Login" button, a frame outlines the button and it
does not respond. The device funct...
I have a number of FortiAP U431F AP's installed that have a download
speed that is approximately %30 of the upload speed. I have a 200Mbps
connection which averages approximately 185Mbps upload and download
speeds with wired connections. Wireless con...
I recently remotely upgraded my FortiGate 81E from version 6.0.4 to
version 6.2.0 as per instructions and guidance provided by Fortinet. The
remote upgrade of the 81E was successful but I lost access to numerous
FortiAP C24JE devices. A support ticke...
The solution for this problems is fairly straight forward and documented
but must be modified when remote access to the system is all that you
have. First, backup your system. This is not required but the solution
requires the internal disk to be for...
Downgrading the FortiAnalyzer to version 6.2.5, build 1307 restored the
GUI login functionality. However, the default templates and charts are
now missing. This is an unacceptable solution and is not recommended for
factory production FortiAnalyzers....
I have applied the commands recommended by Patel and they successfully
restored the FortiDDNS service after a brief period of time due to the
changing of protocols to UDP. The solution restored my service as well
on version 6.4.2. Thank you Patel!
I am experiencing this issue with a FortiGate 200F connected to the
Internet through Cox as well as a FortiGate 81E connected through
Xfinity. Both were upgraded to 6.4.2 and are experiencing the same
issue. I have rebooted both systems a number of t...
Thank you for your help. I did try rolling back to 6.0.4 using the
instructions in the KB article and the C24JEs did not reconnect. I am
still having the same issue. I will keep an eye out here and on my
support ticket for resolution. Thanks for the ...
