We have MPLS connecting all of our sites and we just brought in
secondary ISPs for backup.I'm in the process of getting ADVPN set up
between our main/hub site and a single spoke site.For MPLS, we're using
static routes back to the MPLS router.On the ...
I know this is an old post, however I stumbled in to the same thing.
From what I understand, Use Public IP Address is used when you have a
NAT between your firewall and the internet. If you have a WAN IP address
on the interface you're trying to conf...
I know this is an older post and maybe things have changed since this
question was originally asked but you can have a rule with "set action
deny" which will stop processing in a route-map. For instance:config
router prefix-list edit "deny_list" conf...
rodriguin wrote:Do you have a solution for this? I want to deploy ADVPN
in a environment between sites with VPN and MPLS too. I don't believe
there's an easy way to get them to work together nicely - from what I've
found you really need a dynamic rou...
ronildo@secureway.com.br wrote:Hello, its very simple if i understand
what you trying to do. If you wanna do a failover using MPLS, you simple
just need to create a VPN MPLS, set a IP on the VPN tunnel interface A
like 1.1.1.1 IP VPN Tunnel B 1.1.1.2...
