I'm getting ready to replace an ASA with an FG200E. On the ASA I have a
portchannel of all 6 GBE interfaces and all my firewall interfaces are
vlans beneath that portchannel. Before I do the same thing on the FG I
thought should see if there are any ...
With an aggregation of Wan1/2 I can still have multiple ISP's connected.
ISP1 = portchannel0.vlan200, ISP2=portchannel0.vlan201. Those can both
still end up as interfaces in an SD-Wan config. This way I get port
redundancy so I can replace the switch...
Yes it can handle it. To do the agg you would create a new interface of
type 802.3ad which includes the two physical ports you want aggregated
into a bundle. The virtual wire pair is completely different. Here's the
info on that:
http://cookbook.fort...
I've been researching this and I don't think there is any reason for
concern. The one thing I found that I'm not sure whether it matters or
not is that there are two separate PCI buses in the FG200E. Ports WAN1
thru 8 are on the first and ports 9 thr...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
