I have a Fortigate 60E for our small network and created some VLANs to
separate the VOIP, CCTV, Servers, Laptops, etc. The VLAN side works fine
and as expected, even the routes from laptops to server DNS, DC, File
Shares, etc is working. However sinc...
I have a Fortigate 60E and last night it came up with a number of web
filtering alerts through the night from a few PCs and 2 servers but not
sure what it is other than something Google related. Here's part of the
error below and the site blocked is ...
Is it secure to use the fortigate ssl certificate or is it recommended
to use your own as in the cookbook doesn't state. Also once the ssl vpn
is setup and a user logged in how can you tell the ssl is working and
encrypted is there an easy test. Than...
I have a fortigate 60e with 2 WAN lines coming in so I setup SD WAN with
50% volume on each and then set a SD-WAN status check and it shows as
both WANs up. Then I changed my IPv4 policy instead of it been WAN1 to
SD-WAN but now the internet wont wor...
I setup a Fortigate 60E with VPN access last week and using a cheap ssl
certificate we had for a domain of ours we didn't use. I'm trying to
work out how i create individual client certificates from this? I have
it working where the certificate is in...
thanks its working again using our internal DNS. I created a policy to
allow SSL to the orange VLAN and users can use the internet on the vpn
using our DNS. Appreciate the help
Thanks Adrian, doing the nslookup using 8.8.8.8 DNS works and if I set
the config in the Fortigate SSL-VPN settings to use that DNS server then
internet access works. Still confused as to why the client ISP DNS
doesn't work especially when they can u...
thanks for the reply but bit confusing as SSL's arent my strongest
point. Is there anyway i can create client certs from what I have or
atlkeats 1 client cert that every user uses as we only have 2-3 remote
workers
toshiesumi wrote:Go to File->Settings. You can lock it with a password
there. Theres no way to lock it in there unless im missing something
obvious, check out screenshot here
mgrosni wrote:Never tried not managed FC. But as I know, you can export
the config, change settings to lock the configuration and then import
the changed xml. Maybe this could be helpful
https://docs.fortinet.com/d/forticlient-5.6.6-xml-reference ok ...
