Hello All Here is my question. Hope someone can help. First of all, my
fortigate are F60E with 5.6.9 firmware. 1º. My HeadQuater firewall is a
ADVPN with BGP and a provider with OSPF.2º Remote Sites has also main
VPN provider with BGP and provider wi...
Hello Everybody I have the following configuration in a interface and
devices in each subtnet cannot communicate each others. edit
"industrial" set vdom "root" set ip 172.30.186.10 255.255.254.0 set
allowaccess ping set description "Industrial" set r...
Hello I'm natting One-to-One VPN-FGT-??????? # show firewall ippool
config firewall ippool edit "SNAT_???_Subnet_???" set type one-to-one
set startip 172.20.192.0 set endip 172.20.199.255 set comments "VLAN 192
especifica de la sede" next endVPN-FGT-...
Hello I did what you do and seems to be fine. But I still have problems
wit NAT one-to-one. is it not supposed to transform OneSource IP to it
"equal" SecondaryIP keeping the same final octets? I mean, i was to
translate a 172.16.192.0/21 to 172.20.1...
Hello What I found using a debug is the traffic is denied by the
explicit rule "deny all"2018-10-11 13:02:30 id=20085 trace_id=13
func=print_pkt_detail line=5295 msg="vd-root received a packet(proto=1,
192.168.100.10:1->192.168.200.10:2048) from inte...
