Hello. We have an Active/passive cluster setup with 200F devices that
interface with a redundant LAN network. During the setup there were
issues with loops occurring that were blocked by STP in the LAN network.
The cluster LAN interfaces on the firew...
Hello Prasanna27, If you are just looking for a way to utilize that
fortilink port as a regular port, go into the Interfaces section, select
fortilink, and hit "x" next to the port to remove it from fortilink.
Then you can use that port interface for...
Hello tenvuladu, If you just want to restore an old config, I just went
through this this week for the first time. It is pretty straight
forward. You'll need a console cable(and possibly right drivers on
Windows), terminal program such as putty, a TF...
Thank TE for the clarification. I thought it was just because
virtual-switch-vlan was set to disable on the 40F. As you mentioned, the
switch types function the same. Once the changes were set correctly, it
took and is working fine. One note for othe...
I believe it worked. I have a 40F and mimicked the setup with a
successful change. And everything appears to be working as expected.
After I made the two changes along with removing the config system
switch-interface section and modifying the switch-...
Hello Toshi, Thank you very much for your response. Although the VLAN
switch was working functionally as a hardware switch, my issue was with
the VLAN switch causing problems with the GUI. In the web interface, all
the interfaces were listed as down ...
