Our setup is such that we're trying to get our FG1101E to act as both
router and firewall with BGP routing. We have our ISP provided single
fiber uplink at 10gbps (SFP+) which has a defined Point to Point IP /29
IP address that's used to peer with a ...
So, due to various issues with our Wi-Fi, which consists of a mixture of
165 x 231F's and 16 x 211C's, my Dell 3150 Lattitude Laptop with an
Intel AX160 NIC can only shift up to 1.3mbps. The Signal on the AP and
the Client are -62db the noise -95 so ...
So as it happens, the Central SNAT feature has made this process more
manageable, so I've created a rule to NAT out via my assigned public IPs
in the Central SNAT page LAN->WAN NATing with y.y.y.138/29.I already had
reciprocal firewall policies to pe...
Mixture of both, some IPs are used on VIPs, some are used to push
different networks out on different public IPs (we have a few other
subnets that will be migrated at a later stage). We're education sector
so many purchased services are pinned to cer...
I need to use an IP on a WAN interface that's in a prefix I'm
advertising to the peer. I only have one physical WAN interface. WAN_BGP
is on VL200 between my ISP and my FG, the point to point subnet is
x.x.x.101 --> x.x.x.100 /31-BGP Advertised Prefi...
The latest available is v6.0.0 build 44 I believe, I’ll try that setting
as some areas have 221B’s. Those buildings will be destroyed next year
so no point investing.