Generally speaking, when FortiGate manages PoE FortiSwitch.Whether you
use GUI or CLI, you can control PoE on or off.But once the switch
interface mode is changed from static to NAC.You will find that you can
no longer turn on or off the PoE function...
FAP-231E with 2 ethetnet port when use FortiOS 6.4.3 FAPOS 6.4.3can't
bridge SSID from WAN-LAN mode we think profile can't work fine from this
port-----------------------------------------------------about FAP-C24JE
the GUI are different and bad to u...
Environmental description :Fortigate-501E with OS 6.4.3 Fortiswitch
1024D --> 424D --> 124EFpoe with OS 6.4.4 FortiAP 221B, 221C, 221E with
top version Description of the situation:Some FAP (not all) can't get IP
form Fortigateso, Tunnel SSID can't w...
Please see the following example : config switch-controller
managed-switch edit S424ENTFxxxxxxxx config ports edit "port1" set vlan
"vsw.FortiLink" set allowed-vlans "WoL_Vlan" set untagged-vlans
"qtn.FortiLink" set export-to "root" end Where allowed...