Most Liked Posts Recent Solutions
No Content Available

User Activity

Description In FortiOS 4.0 MR2 and before, other-traffic is not enabled by default. In FortiOS 4.0 MR3 and later, the setting name is changed to extended-traffic-log and is enabled by default. This may lead to a large increase in traffic log activity...
DescriptionこのKBでは、2つのConserve modeの特徴とその違いに関する次のような疑問について解説しています。また、Conserve modeに対するソリューションについても紹介しています。 Conserve modeとはどのようなモードですか? 通常のConserve modeとKernele conserve modeの違いは何ですか? どうやってメモリ使用率はどのように確認することが出来ますか?また、Conserve modeになる状態に近付いているかどうかをどうやって...
Description This article describes a number of different methods to install FortiAP firmware when it needs to be reloaded, upgraded or downgraded. The following methods can be used: Through TFTP server during boot sequence Through FortiGate Wireless ...
Description This article describes how to reset the FortiAP configuration to default when it is necessary to clean up any FortiAP settings.Solution The FortiAP configuration can be reset to the initial factory default settings by using the 'cfg -x' c...
DescriptionこのKBでは、"Kernel enters conserve mode"の意味について解説しています。また、Conserve modeに対するソリューションについても解説しています。 これは、オリジナルKB“The system has entered conserve mode” Fortigate log message explanationを翻訳したものです This is a Japanese translation of the KB article 11076...
My Top Kudoed Posts
Kudos from