Hello I have telemetry enabled for a firewall, manually install the
forticlient and register it to the firewall adding the ip address of the
fortigate, I observe it connected, I take out the backup of the
forticlient. After that, with configuration t...
Hello I would like your collaboration, you have a face 1000c that is in
the end of life dated 2019/01, the license expires in 2018/11, in that
case after expiration of the license it is possible that the team
continues to function normally obviously ...
Hello I would like your help regarding a doubt I have about the
operation of the dns on a windows machine when a vpn connection is made
through the forticlient. There is a vpn client to site and when the
connection is made, routes are received to a s...
Hello I would like your help, you have an active active cluster in which
you have connected a wan and a lan (and the interface of hearbeat), on
the monitoring you have the wan and lan interfaces. According to the
documentation in this type of active-...
Hello I hope you can help me, I need to know if there is any command
with which I can validate the email with which a Fortigate team is
registered. I know that this can be validated via web and fortinet page
but I need to know if it is possible to do...
Hello You could share what was the solution for the blacklist message in
the Fortigate dashboard after having untied the ip from the blacklist.
Thank you
xsilver wrote:Hi,issue might be caused by DNS which is not updated with
proper IP when you switch networks.By default MSFT DNS allows updates
from DHCP but not clients and once DHCP assign new IP the A DNS record
is overwritten by that IP.If that is ...
Hello xsilver_FTNT this time applies for when the authentication is done
to the captive portal via ldap? , or for this case another time out is
handled. Additional if I lock my machine for about 60 minutes and then
enter again to work I must or if I ...
Hello Thanks for your help, however I have a concern about the use of
isdb in 5.6.3, I only see that it is possible to use it in static routes
BUT if I have a static route created towards a ip xxxx with gateway yyyy
that belongs to microsoft ( distan...
