I have a question:We have Fortigate on AWS, and the WAN IP is delivering
the AWS public IP: However, a LAN IP is configured on the Fortigate
interface: To set up an IPSEC VPN, I obviously have to point to “WAN IP”
54, but how will this communication ...
Do I need to configure the Fortigates directly in FortiManager, or can I
configure them (directly in the box) and then upload the settings to the
manager?Is there any documentation on how to do this?*I need to make
some configurations on some Fortiga...
Hello,I need to migrate an SSL VPN from a fortigate 7.2.10 to another
fortigate 7.4.8, but the SSL VPN feature doesn't exist; I tried to
enable it via CLI and it doesn't appear either set gui-sslvpn enable
Fortigate 180F
Yes, a LAG.The links are connected to the switch and pass through the
trunk to the Fortigate.I put WAN to make it easier to understand.VPN
with vlan200 (187.23.200.39) is intermittent, as if it were
asymmetrical, sometimes it works and sometimes it d...
It's not DHCP, the two links are dedicated:get router info routing-t
allCodes: K - kernel, C - connected, S - static, R - RIP, B - BGPO -
OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA
external type 2E1 - OSPF external type ...
