HI All, I have 4 interface as below: Port 13 = WAN 1 x.x.x.x Port 14 =
WAN 2 x.x.x.x Port 15 = WAN 3 x.x.x.x Port 9 = Internal 192.168.1.1 I
have 4 static routes as below: destination 0.0.0.0/0 gateway x.x.x.x
(WAN 1) destination 0.0.0.0/0 gateway x....
Actually i already tried that and no timeout at all. So its definitely
the firewall that causing the timeout and i think its because i wrongly
create the additional static route
The only thing they highlight to me is that when they do a continuous
ping, it will timeout once every 10 replies. Currently i already ask
them to test the connection but still they havent get back to me. The
remote site is quite far from my place an...
I just want to say thanks Ede because you really help me when the
support people cannot or very slow to advice to. I think we already
found the root cause why when bypass proxy the pc affected becomes very
slow. Which is because i create a static rou...
Thanks Ede. I learn something really basic about routing today. Which i
just realize after doing this for 2 years...haha. Below is the policy.
The concern is on the LAN > WAN policy
I see, in that case can i just remove the static route as below from the
static route table? destination gateway Device 192.168.1.0/24
192.168.1.1 port 9 199.168.10.0/24 199.168.10.1 port10 Below is the
routing monitor:
