I recently converted from the NetScreen line of firewalls to a
FortiGate. One of my few issues with working with FortiOS at the command
line was the inability to look at policies in a from->to format that was
available in ScreenOS. The Fortinet sales...
To my knowledge, there isn't anything that will report on the
utilization of the backplane links to the ASICs. You can get an idea by
monitoring the individual port statistics with a network monitoring
system and I think that's about as good as it ge...
Kind of depends on where you are in the command structure as to what
you've just done. For all we know you just started to edit an address
entry. Check the CLI reference manual. It should cover everything you're
looking for. [link]https://docs.fortin...
That 40Gb/s is marketing bs because the 3240C has 2 NP4s. A single NP4
will not be able to handle a full 40G through it. The hardware
acceleration guide covers how the ports are mapped to the NPs.
https://docs.fortinet.com/uploaded/files/3941/fortiga...
This is how I run a pair of fortigates and I've upgraded them a few
times in the past several years. As I recall, the secondary unit will
migrate its active VDOMs over to your primary unit before upgrading and
then all of the VDOMs will get migrated ...
